Remove Old Wood Paneling the Easy Way

May 3, 2014 | By | 3 Comments

Last week we were contracted to remove some popcorn ceilings in an older home in West Ashley SC. While we were there our client asked about removing the paneling on the walls and replacing it with drywall. The house was built in the 1950’s and the room we were working on was part of an addition built in the early 80’s. So half of the room had been paneled over the original plaster and the other half was hung on studs.

Sometimes paneling was used to hide wall damage which wouldn’t be exposed until removing it, which could make for a nasty surprise. Looking at the options seeing how extensive the job would be to remove the paneling and install drywall I suggested another route. Keep the paneling but make it look like drywall. Doing so would save a lot of time and money.

Painting Paneling before 01

Make That Paneling Disappear

So how exactly did I plan on making it disappear? painting paneling before close up Simple, apply joint compound over the grooves until they were flush with the rest of the wall. The grooves in the paneling required two full coats of joint compound. Afterward, I did a complete skim coat to help level the grooves some more and also fill in the remaining wood texture. Once that dried the walls only needed a quick light sanding and they were perfectly smooth.

Priming

After the first coat of joint compound, I noticed some tannin bled in the grooves so after the walls were sanded I applied a full coat of Zinsser CoverStain. On this job I wasn’t planning on using a stain blocker because it was painted previously, however, if you are going to do this on unpainted paneling plan on giving the walls a full coat of a good stain blocking primer to prevent any bleeding.

Painting

Finally the easy part, time to paint! I painted the walls two coat, a Sherwin Williams color called Greyish SW6001 with Sherwin Williams Cashmere flat enamel.

painting paneling after

End Result

After all was said and done the walls look perfectly smooth, not a trace of the paneling was left. By choosing to fill the grooves and texture I’m willing to say I completed the job in half the amount of time and removing it and the end result was the same. Nice, even, smooth walls.

 

painting paneling before close uppainted paneling walls

Call Paragon Painting

If you reside in the Charleston SC area and have old paneling you’d like to make disappear give us a call. 843-695-9450

 

Related Posts :

  • A couple weeks ago Paragon Painters was contracted to remove popcorn and paint the ceiling, walls, and trim in a home on Johns Island SC. We were ...

  • This week Paragon Painters completed a complete exterior painting job on a house in Hanahan SC.The house was badly faded from a combinatio ...

  • This week Paragon Painting finished a big interior painting project in Mt Pleasant SC. From start to finish this paint job had it’s own set of ...

Filed in: Interior Painting, Job Profile | Tags: ,

About the Author (Author Profile)

I've been brought up in the painting industry and have learned everything I know from my father Paul Briggs. He is the founder of Paragon Painting and I joined him full time in 2003 after graduating college. I am now happily married with two beautiful children ages two and five.

Comments (3)

  1. Wow, what a transformation! Looks like much easier and cost effective than replacing!

  2. Hi there to all, the contents present at this web page are truly remarkable for people knowledge, well,
    keep up the nice work fellows.

  3. Fantastic site. Plenty of helpful info here. I am sending it to a few friends ans additionally sharing in delicious.
    And of course, thanks for your effort!

Leave a Reply

Trackback URL | RSS Feed for This Entry